1. This is a diy product that provides perfect vector network measurement capabilities in the size of a credit card. Includes a 2.8-inch touch screen, 400mah battery, and can be used offline for 2 hours.
2. The tx/rx mode measurement can measureplete s11 and s21 parameters. If you need to obtain s12 and s22, you need to manually replace the transceiver port wiring.
measurement frequency: 50khz ~ 300mhz (50khz -900mhz, enable extended firmware)
rf output: -13dbm (maximum -9dbm)
frequency accuracy: <0.5ppm
measurement range: 70db (50khz-300 mhz),(50db (300m-600mhz),40db (600m-900mhz) enable extended firmware);
port swr: < 1.1
display: 2.8 inch tft (320 x240)
usb interface: usbmunication mode: cdc (serial)
power: usb 5v 120ma, built-in 400mah battery, maximum charging current 0.8a
? number of calibration points: 101 (fixed)
number of scanning points: 101 (fixed)
display tracking: 4, marking: 4, setting save: 5
1x vector antenna network analyzer
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Please allow slight dimension difference due to different manual measurement.
1. The metal shield is designed to reduce the external interference and improve the measurement accuracy.
2. Pc control software: the pc control software can export touchstone (snp) files, which can be used for various radio design and simulation software
3. Small and portable: easy to use, this project aims to provide an rf gadget but useful instrument for enthusiast.
4. Metal shield: the metal shield is designed to reduce the external interference and improve the measurement accuracy. The 50k-300mhz frequency range of the si5351 direct output provides better than 70db dynamic.
5. Simple and practical: pc control software, you can export touchstone (snp) files for various radio design and simulation software through pc software